Resetter Canon IP 2770 "error number : 5200"

This time we will discuss Blink 13x Orange on the Canon iP2770. This incident may be quite confusing for who have never experienced it. OK just go to the scene ...


Early indications:
When the printer is turned on seems OK, but after the print command, it would appear Blink iP2770 Canon 13x Orange on this. Here's a picture which appears on the screen:




How to Cope with iP2770 Canon 13x Orange Blink:

1. If performed Blink 13x Orange with the picture above, means catrid color requires reset (having runout).

2. How: press the Resume button until the printer sounds a long process, then release.

3. If an Orange Blink 13x, meaning black catridge also need a reset (having runout), and the picture is as follows:


4. Same way: press the Resume button until the printer sounds a long process, then release.

5. Done, printer iP 2770 distinguished Blink 13x Orange will return to normal.

This often happens when the cartridge runs out finished refilled and then installed again.

For "error number 5200"



There are two ways: manually or via software.

Manual:

1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... do not released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (Do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. Press the POWER button, then the printer will die.
8. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready for use.


Software:

1. Prepare 2 blank paper in the printer
2. In the menu "Clear Ink Counter" click "Play" and "Platen"
3. Click Test Print ... Done.

Location resetter software is below.

Good luck ...


Artikel Terkait

Resetter Canon IP 2770 "error number : 5200"
4/ 5
Oleh

Berlangganan

Suka dengan artikel di atas? Silakan berlangganan gratis via email

8 komentar

Anonymous
February 21, 2011 at 11:44 PM delete

thanx your error 5200(manual procedure) really works, iv been searching for a solution on this error for days now. anyway, what causes this problem? so that i could prevent my mistakes in operating printer..
thanx again...

Reply
avatar
Anonymous
April 8, 2011 at 8:28 AM delete

yeah. tqvm :)

Reply
avatar
Anonymous
May 2, 2011 at 10:00 AM delete

good good it works.

Reply
avatar
Anonymous
July 18, 2011 at 2:05 PM delete

blind goba japon oi...bad trip

Reply
avatar
Anonymous
December 12, 2011 at 3:03 PM delete

it works yes it works!!! thnx a lot!!!!

Reply
avatar
January 7, 2012 at 3:24 PM delete

Yes, Its Working. Great :) :)

FuaD
http://macfuad.com/

Reply
avatar
Anonymous
August 17, 2012 at 8:03 AM delete

does not work for me..the error message is "EB00"..

Reply
avatar